Sanpra Aerosol Pvt. Ltd.

SANPRA® RUST REMOVERGRADE: SPN-8734Sanpra RUST REMOVER is a highly active rust remover thinner based on polyoxosate innovator medium.
APPLICATIONS:

• Use rubber gloves for handling.
• Use with adequate ventilation.
• Either apply by brush or dip (better) depending upon size and shape of the surface or object.
• Keep rust remover liquid in contact of surface or dip/immerse for 30-60 minutes depending upon rusted condition.
• Take out the immerse object from the tank allow rust remover liquid to drip off completely and wipe out with old clean cloth/dhoti.
• Apply primer or rust preventive to the treated surface within 3-4 hours otherwise in humid condition rust layer may reappear.
• Material should be kept in plastic container. Do not store in metal container.

FOR INDUSTRIAL PURPOSE ONLY

• Sanpra® TREADMILL OIL makes the treadmill run smoothly.
• Reduces friction, wear and heat generated during continuous operation
• Recommended for all manual and motorized treadmills
• Helps to increase the life of motor, belt and rollers by offering a 100% multi-viscosity silicone formula that reduces friction and keeps the treadmill running smoothly.

Sanpra's High Temperature Chain Oil is a top-quality oil made for chains that work in very hot conditions. This special oil keeps working well even when it gets really hot. It goes deep into the chain parts to reduce rubbing and wear, helping the chain last longer. This oil sticks well to the chain, so it doesn't come off easily and keeps the chain lubricated well.
This oil is perfect for machines and vehicles that use chains and get very hot. Using Sanpra's High Temperature Chain Oil helps your chain systems work better and last longer, even in tough conditions.

SANPRA® offers a wide range of water clear SILICONE OIL fluids in various viscosities ranging from 0.65 centistokes to 1,00,000 centistokes that have a combination of properties that give superior performance in a wide variety of applications.

SANPRA® WELD-SHINE GRADE: SPN-009WELD CLEAN PICKLING GEL
FOR STAINLESS STEELPRODUCT CONFIRMS TO ASTM-A380
APPLICATIONS:
Sanpra pickling gel is used to remove the black oxide mark or burn scale, weld seams, heatmarks, annealing colors, rust spot and weld joint discoloration left during welding of stainless steel.
Directions for Use:

• Brush weld area with stainless steel brush.
• Apply sanpra pickling gel with bristle brush.
• After 10-45 minutes rinse off with water.
• Cleaning time will depend on grade and thickness of stainless steel.

 FOR INDUSTRIAL & MANUFACTURING PURPOSE ONLY